Ultrasonic Facials -

Ultrasonic Facial

How to use - Deep Cleanse Treatment

Step 1: Apply warm water to your clients face using a face cloth or flannel. The skin must remain wet during the entire treatment. Never use the device on dry skin.

Step 2: Turn unit on by pressing the power button until the unit engages. This will automatically begin in cleaning mode.

Step 3: Hold the unit so that the control panel is away from the skin.

Step 4: With gentle pressure, scrape the blade over the skin using a forward movement. You will see a fine spray of water droplets and dead skin cells being collected on the end of the blade. For best results, take your time and work slowly moving the blade at all times.

Step 5: Methodically work over all areas of the face. Pay special attention to the corners of the nose as this area will usually produce the most extractions. Wipe the blade when required.

Step 6: After use, turn the unit off by pressing the power button until the unit turns off. The blade may be cleaned by wiping with a damp cloth. Store the device with the protective silicone sleeve on the blade. Note: If left on, the unit will automatically turn off after 10 minutes.

IMPORTANT:- ENSURE THE DEVICE IS STERILISED WITH MEDICAL GRADE ALCOHOL WIPES BETWEEN CLIENTS.

How to use – Absorb Treatment

Step 1: Apply a layer of serum to the face. If the face becomes dry during the treatment add more serum or lotion.

Step 2: Turn unit on by pressing the power button until the unit engages. Select absorb by pressing the power button once. This will engage the pulsing wave programme.

Step 3: Hold the unit so that the control panel is towards the skin.

Step 4: With gentle pressure, glide the blade over the surface of the skin using a backward motion. This time you are dragging the blade instead of pushing it over the skin. The serum will gradually be absorbed deep into the skin. For best results, take your time and work slowly moving the blade at all times.

Step 5: Methodically work over all areas of the face.

Step 6: After use, turn the unit off by pressing the power button until the unit turns off. The blade may be cleaned by wiping with a damp cloth. Store the device with the protective silicone sleeve on the blade. Note: If left on, the unit will automatically turn off after 10 minutes.

IMPORTANT:- ENSURE THE DEVICE IS STERILISED WITH MEDICAL GRADE ALCOHOL WIPES BETWEEN CLIENTS

How to use – Repair Treatment

Step 1: Apply a generous amount of moisturiser to the face.

Step 2: Turn unit on by pressing the power button. Select absorb by pressing the power button twice.

Step 3: Hold the unit so that the control panel is towards your skin.

Step 4: With gentle pressure, glide the blade over the surface of the skin using a backward motion. This time you are dragging the blade instead of pushing it over the skin. The serum will gradually be absorbed deep into the skin. For best results, take your time and work slowly moving the blade at all times.

Step 5: Methodically work over all areas of the face.

Step 6: After use, turn the unit off by pressing the power button until the unit turns off. The blade may be cleaned by wiping with a damp cloth. Store the device with the protective silicone sleeve on the blade. Note: If left on, the unit will automatically turn off after 10 minutes.

IMPORTANT:- ENSURE THE DEVICE IS STERILISED WITH MEDICAL GRADE ALCOHOL WIPES BETWEEN CLIENTS

What is an Ultrasonic Facial?

This high-tech facial uses a specialized ultrasonic/ultrasound machine that emits high-frequency waves.

Ultrasonic treatments benefit a variety of skin types and can improve many common skin conditions. The esthetician can customize the ultrasonic facial according to each client's skin type and skincare needs.

In a treatment, the ultrasonic machine’s high-frequency waves work to:

Exfoliate dead skin cells for clear and radiant skin without the redness and irritation that can sometimes result from Microdermabrasion or AHA peels.
Loosen and remove oil, dirt and sebum from the pores and hair follicles, resulting in less blackheads and breakouts. Ultrasonic frequency zaps bacteria and de-congests the pores.

What does an ultrasound facial do?

During an Ultrasonic Facial, high level sound wave technology is used to penetrate deep below the surface of the skin, promoting cellular renewal and repair, toning of muscles, increasing blood circulation, encouraging lymphatic drainage, and improving skin care product penetration. Watch as we demonstrate the process behind our signature ultrasonic facial treatment.

How Does Ultrasonic Facial Work?

Ultrasonic Facial is a gentle, non-invasive treatment that is safe for all skin types and conditions, from acne or rosacea to mature skin. Even the most sensitive skin will benefit from this treatment. The application of ultrasonic frequency is used to increase cellular turnover, plump up and smooth out fine lines and wrinkles, improve acne, tighten enlarged pores, relieve puffy eyes, or fade dark eye circles. The sound waves penetrate into the skin but they do not cause any discomfort or adverse side effects, making the process highly effective, with no downtime, redness or pain.

The sound wave technology is used to penetrate below the surface of the skin, ultrasound energy is absorbed which results in a slight rise in temperature in the surrounding tissue. This promotes cellular renewal and repair, increases blood circulation, encourages lymphatic drainage, combats puffiness and swelling. Sound vibrations also have the power to push nutrient-rich serums deeper into the skin, increasing active ingredient in products.

Got questions that need answering?

This is one of the places you can use for adding FAQ answers on your website. You can edit all of this text and replace it with anything you want to answer for your client. Edit your FAQ page from the Pages tab by clicking the edit button.

The ultrasound facial Result?

Clear, healthy skin with noticeably tighter pores.

Gently stimulates skin to encourage collagen and elastin production. With a series of treatments, fine lines and wrinkles are less noticeable and skin color, tone and texture becomes more even and uniform.
Stimulates blood flow and lymphatic drainage through the combination of ultrasound and electrical therapy. This nourishes the skin and gives it a youthful rosy glow.
Facilitates hydration and plumps the skin, thereby filling out fine lines and wrinkles.
Helps skincare products do their job by penetrating deeper into the skin. This is especially true for anti-aging and antioxidant serums, creams and masks. Unless an active product is pushed deep into the lower levels of the epidermis, it won’t have a lasting, anti-aging impact on the skin.

Is it Safe?

Safe for most people: The sonic waves emitted by the ultrasound machine aren’t harmful to your health. However, if you have an autoimmune disorder, a diagnosed heart disorder or cancer, it’s best to skip the ultrasonic treatment. Anyone living with a chronic health condition should check with his or her physician before proceeding with any aesthetic treatment. The ultrasonic facial is gentle, non-invasive suitable for most skin types, from acne to rosacea and sun-damaged skin. Because the ultrasonic mechanism is so effective at cleaning clogged pores, painful extractions are unnecessary. Your skin will have that lit-from-within glow - making it the perfect treatment to indulge in before a big event. Once your skin is rejuvenated and healthy looking, maintain your results with monthly ultrasonic facials.

Facial with Ultrasonic & Ultrasound Machine thumbnail

Please download and sign your certificate here: Ultrasonic Facial Certificate.pdf